KEY FEATURES
- Carbon/Ceramic Type 21 Shaft Seal
- Oil-Filled Motor with Automatic Reset Thermal Overload for Maximum Protection (single phase models)
- Upper and Lower Single Row Ball Bearing Construction
- Piggyback Plug Available for Easy Maintenance and Switch Replacement
- Submersible, Two-Vane, Semi-Open Cast Iron Impeller
WARRANTY
12 months from date of purchase or 18 months from date of manufacture, whichever comes first.
OTHER PRODUCT IMAGES
PERFORMANCE CURVE
RESOURCES
Downloads
SPECIFICATION
BODY CONSTRUCTION: Class 30 Cast Iron
HORSEPOWER: Available in 1/2, 1, 1-1/2, and 2 HP
MAXIMUM HEAD: SKHS200: 75 ft. (22.9 m)
MAXIMUM CAPACITY: SKHS200: 175 GPM (11.0 LPS)
FLOW at 10' LIFT: 10' of Head is Below Recommended Head for This Series
SWITCH TYPE: Wide-angle Tethered Float Switch OR Manual Operation (model dependent)
MINIMUM SUMP DIAMETER: Simplex: 18" / Duplex: 30"
DISCHARGE PIPE SIZE: 2" NPT (3" NPT optional)
MAXIMUM SOLIDS HANDLING SIZE: 2"
AMP DRAW (full load): Model and Voltage Dependent - See Spec Sheet For Details
CORD LENGTH: 10' SJTW (20' optional)
VOLTAGE: 115v or 230v in 1- or 3-phase (model dependent)
MAXIMUM LIQUID TEMPERATURE: 130 Degrees F (54 Degrees C)
MOTOR: Split Phase with Thermal Overload Protection
IMPELLER CONSTRUCTION: Class 30 Cast Iron