This product has been discontinued and replaced by Pentair Myers MDC series cast iron sump pump.

  • Construction – Heavy-duty cast iron motor housing and upper volute. Corrosion-resistant composite base ideal for effluent applications.
  • Bearings and Mechanical Seal – Permanently lubricated for long life.
  • Cord Seal – Prevents oil loss from and protection for motor if cord is damaged.
  • Overload Protection – Built-in thermal overload with automatic reset.
  • Intake – Built-in suction screen.

RESOURCES

SPECIFICATIONS

APPLICATIONS: Septic Tank Effluent Removal, Sump Drainage, and Circulation
CAPACITIES: 62 GPM 235 LPM
SHUT-OFF HEAD: 32’ 9.8 m
OPERATION TETHERED: On: 14” 355.6 mm | Off: 5” 127.0 mm
SOLIDS HANDLING: 1/2” spherical capability 12.7 mm
INTERMITTENT LIQUID TEMP.: 130°F 55°C
MOTOR: 4/10 HP, 1550 RPM, 115 Volt, 60 Hz. Class B insulation. Oil-filled shaded pole containing built-in thermal overload protection with automatic reset.
ELECTRICAL DATA: 115 V, 60 Hz, single phase
ACCEPTABLE PH RANGE: 6-8
SHAFT SEALS: Mechanical carbon/ceramic
MOTOR HOUSING: Cast iron
UPPER VOLUTE CASE: Thermoplastic
LOWER VOLUTE CASE: Thermoplastic Vortex
POWER CORD: 10’ or 20’ water resistant 16-3 gauge, type SJTW-A/SJTW with integrally grounded 3-prong plug.
DISCHARGE, NPT: 1-1/2” 38 mm
MINIMUM SUMP DIAMETER: Simplex 18” 457 mm | Duplex 30” 762mm
Item #VoltagePhase CyclesCord LengthMechanical Switch TypeSwitch Setting OnSwitch Setting Off
Item #
ME40110M
Voltage
115
Phase Cycles
1/60
Cord Length
10'
Mechanical Switch Type
Manual
Switch Setting On
-
Switch Setting Off
-
Item #
ME40110T
Voltage
115
Phase Cycles
1/60
Cord Length
10'
Mechanical Switch Type
Tethered
Switch Setting On
14"
Switch Setting Off
5"
Item #
ME40120M
Voltage
115
Phase Cycles
1/60
Cord Length
20'
Mechanical Switch Type
Manual
Switch Setting On
-
Switch Setting Off
-
Item #
ME40120T
Voltage
115
Phase Cycles
1/60
Cord Length
20'
Mechanical Switch Type
Tethered
Switch Setting On
14"
Switch Setting Off
5"