- Bearing and Mechanical Seal – Permanently lubricated for long life.
- Overload Protection – Built-in thermal overload with automatic reset.
- Cord Design – Prevents oil loss from and moisture protection for motor.
- Serviceability – Heavy-duty lift-out ring, field serviceable.
- Solids Handling – 3/4” spherical capability.
- Stainless Steel Hardware – Allows for easy disassembly after extended service.
- Controls – Standard controls available for automatic operation.
- Float – Mechanical (non mercury).
RESOURCES
SPECIFICATIONS
APPLICATIONS:
Effluent and Wastewater Removal, Sump Drainage, Dewatering, Flood Control
CAPACITIES:
110 GPM 416 LPM
SHUT-OFF HEAD:
58’ 17.7 m
OPERATION TETHERED:
On: 18” 459.7 mm | Off: 9” 231.1 mm
SOLIDS HANDLING:
3/4” 19 mm
INTERMITTENT LIQUID TEMP.:
130°F 54.4°C
MOTOR:
1/2 HP, 3450 RPM, 115 Volt or 230 Volt, single-phase, 60 Hz. Oil-filled. Built-in thermal overload protection with automatic reset and permanent split capacitor
ACCEPTABLE PH RANGE:
6-9
SHAFT SEALS:
Type 6A or equal, Buna-N elastomers, silicon carbide sealing faces, stainless steel metal parts
MOTOR HOUSING:
Cast Iron
VOLUTE CASE:
Cast Iron
IMPELLER MATERIAL:
Cast Iron Vortex
POWER CORD:
20’ oil and water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug.
DISCHARGE, NPT:
2” (50.8 mm)
| Item # | HP | Amps (Max) | Voltage | Phase Cycles | Cord Length | Mechanical Switch Type | Switch Setting On | Switch Setting Off |
|---|---|---|---|---|---|---|---|---|
Item # ME750120M | HP 1/2 | Amps (Max) 13.0 | Voltage 115 | Phase Cycles 1/60 | Cord Length 20' | Mechanical Switch Type Manual | Switch Setting On - | Switch Setting Off - |
Item # ME750120T | HP 1/2 | Amps (Max) 13.0 | Voltage 115 | Phase Cycles 1/60 | Cord Length 20' | Mechanical Switch Type Tethered | Switch Setting On 18.1" | Switch Setting Off 9.1" |
Item # ME750220M | HP 1/2 | Amps (Max) 6.4 | Voltage 230 | Phase Cycles 1/60 | Cord Length 20' | Mechanical Switch Type Manual | Switch Setting On - | Switch Setting Off - |