The MPB series serviceable high pressure booster pumps are the most durable booster pumps available. The floating impeller design minimizes thrust loads, allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components.
- True back pull-out design allows impeller and bearing frame to be backed out of volute without disturbing plumbing or mounting fixture, saving time needed for preventive maintenance
- Precision fit impellers are designed to maximize hydraulic pressure and water delivery at each stage
- Staging system uses ceramic wear surface for superior wear and heat resistance that's tougher than steel
- Compact, lightweight design grabs first place for faster installation and improved economy
- Versatile mounting base is specially designed to be an easy fit on a wider variety of challenging applications
RESOURCES
SPECIFICATION
| Item # | GPM | Horsepower | Stages | MAXIMUM DISCHARGE PRESSURE | MAXIMUM INLET PRESSURE | MAXIMUM TOTAL PRESSURE | DISCHARGE SIZE | AMP DRAW full load | Voltage | MAXIMUM WATER TEMPERATURE | Discharge | MOTOR ADAPTER & BASE | Impeller | DIFFUSER | Shaft | O-RINGS | MECHANICAL SEAL |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Item # MPB Series | GPM | Horsepower | Stages | MAXIMUM DISCHARGE PRESSURE 300 PSI (model 10MPB200) | MAXIMUM INLET PRESSURE 80 PSI | MAXIMUM TOTAL PRESSURE Pump Pressure + Inlet Pressure Not to Exceed 315 PSI | DISCHARGE SIZE 3/4", 1", or 1-1/4" NPT (model dependent) | AMP DRAW full load max of 26 Amps (2 HP runinng on 115v) | Voltage 230v/115v or 230v, AC, 1-phase | MAXIMUM WATER TEMPERATURE Prolonged use with liquids above 140 degrees F is not recommended | Discharge Cast Iron | MOTOR ADAPTER & BASE Cast Iron | Impeller Acetal | DIFFUSER Polycarbonate | Shaft 304 Grade Stainless Steel | O-RINGS Buna-N | MECHANICAL SEAL Mechanical Seal - Carbon/Ceramic, Buna-N |
Item # 7MPB50 | GPM 7 | Horsepower 1/2 | Stages 9 | MAXIMUM DISCHARGE PRESSURE | MAXIMUM INLET PRESSURE 80 PSI | MAXIMUM TOTAL PRESSURE Pump Pressure + Inlet Pressure Not to Exceed 315 PSI | DISCHARGE SIZE | AMP DRAW full load | Voltage 115/230 | MAXIMUM WATER TEMPERATURE Prolonged use with liquids above 140° F is not recommended. | Discharge Cast Iron | MOTOR ADAPTER & BASE Cast Iron | Impeller Acetal | DIFFUSER Polycarbonate | Shaft 300 series stainless steel | O-RINGS Buna-N | MECHANICAL SEAL Carbon/Ceramic, Buna-N |
Item # 7MPB75 | GPM 7 | Horsepower 3/4 | Stages 12 | MAXIMUM DISCHARGE PRESSURE | MAXIMUM INLET PRESSURE | MAXIMUM TOTAL PRESSURE | DISCHARGE SIZE | AMP DRAW full load | Voltage | MAXIMUM WATER TEMPERATURE | Discharge | MOTOR ADAPTER & BASE | Impeller | DIFFUSER | Shaft | O-RINGS | MECHANICAL SEAL |
Item # 7MPB100 | GPM 7 | Horsepower 1 | Stages 16 | MAXIMUM DISCHARGE PRESSURE | MAXIMUM INLET PRESSURE | MAXIMUM TOTAL PRESSURE | DISCHARGE SIZE | AMP DRAW full load | Voltage | MAXIMUM WATER TEMPERATURE | Discharge | MOTOR ADAPTER & BASE | Impeller | DIFFUSER | Shaft | O-RINGS | MECHANICAL SEAL |
Item # 10MPB50 | GPM 10 | Horsepower 1/2 | Stages 6 | MAXIMUM DISCHARGE PRESSURE | MAXIMUM INLET PRESSURE | MAXIMUM TOTAL PRESSURE | DISCHARGE SIZE | AMP DRAW full load | Voltage | MAXIMUM WATER TEMPERATURE | Discharge | MOTOR ADAPTER & BASE | Impeller | DIFFUSER | Shaft | O-RINGS | MECHANICAL SEAL |
Item # 10MPB75 | GPM 10 | Horsepower 3/4 | Stages 8 | MAXIMUM DISCHARGE PRESSURE | MAXIMUM INLET PRESSURE | MAXIMUM TOTAL PRESSURE | DISCHARGE SIZE | AMP DRAW full load | Voltage | MAXIMUM WATER TEMPERATURE | Discharge | MOTOR ADAPTER & BASE | Impeller | DIFFUSER | Shaft | O-RINGS | MECHANICAL SEAL |
Item # 10MPB100 | GPM 10 | Horsepower 1 | Stages 10 | MAXIMUM DISCHARGE PRESSURE | MAXIMUM INLET PRESSURE | MAXIMUM TOTAL PRESSURE | DISCHARGE SIZE | AMP DRAW full load | Voltage | MAXIMUM WATER TEMPERATURE | Discharge | MOTOR ADAPTER & BASE | Impeller | DIFFUSER | Shaft | O-RINGS | MECHANICAL SEAL |
Item # 10MPB150 | GPM 10 | Horsepower 1-1/2 | Stages 14 | MAXIMUM DISCHARGE PRESSURE | MAXIMUM INLET PRESSURE | MAXIMUM TOTAL PRESSURE | DISCHARGE SIZE | AMP DRAW full load | Voltage | MAXIMUM WATER TEMPERATURE | Discharge | MOTOR ADAPTER & BASE | Impeller | DIFFUSER | Shaft | O-RINGS | MECHANICAL SEAL |
Item # 10MPB200 | GPM 10 | Horsepower 2 | Stages 16 | MAXIMUM DISCHARGE PRESSURE 300 PSI | MAXIMUM INLET PRESSURE | MAXIMUM TOTAL PRESSURE | DISCHARGE SIZE | AMP DRAW full load | Voltage | MAXIMUM WATER TEMPERATURE | Discharge | MOTOR ADAPTER & BASE | Impeller | DIFFUSER | Shaft | O-RINGS | MECHANICAL SEAL |
Item # 20MPB100 | GPM 20 | Horsepower 1 | Stages 7 | MAXIMUM DISCHARGE PRESSURE | MAXIMUM INLET PRESSURE | MAXIMUM TOTAL PRESSURE | DISCHARGE SIZE | AMP DRAW full load | Voltage | MAXIMUM WATER TEMPERATURE | Discharge | MOTOR ADAPTER & BASE | Impeller | DIFFUSER | Shaft | O-RINGS | MECHANICAL SEAL |