MPN Series Shallow Well Jet Pumps are corrosion- and abrasion-resistant and are ideal for wells with pumping levels of 25' or less.
Self-priming after the pump housing is initially filled with water. Capacities to 18 GPM at 30 PSI.
Supplied with the industry standard 30-50 pressure switch setting
- Fiberglass-reinforced thermoplastic body provides total corrosion resistance and high resistance to abrasion
- Shallow-well jet has corrosion-resistant polypropylene nozzle and venturi
- Precision-molded impeller for perfect balance... ultra-smooth for highest performance and efficiency
- Precision-molded polypropylene diffuser allows pump to prime faster, handle more air
- Heavy-duty motor with stainless steel shaft and dual heavy-duty ball bearings
- Dual voltage capability on all horsepowers. Factory preset to 230v but can be set to 115v easily
- Pressure switch set to 30-50 PSI but adjustable
- Easy removal of a single plug allows for nozzle clean-out
- Bottom-mounted drain plug allows for easy draining and winterization
RESOURCES
SPECIFICATION
| Item # | Body Construction | Horsepower | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 20 PSI | MAX LIFT | MAX SHUT-OFF PRESSURE | MAXIMUM INLET PRESSURE | PRESSURE SWITCH SETTINGS | SUCTION SIZE | DRIVE SIZE | DISCHARGE SIZE | AMP DRAW full load | Voltage | RECOMMENDED BREAKER | MAXIMUM WATER TEMPERATURE | Impeller | BASE | NOZZLE | VENTURI | DIFFUSER |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Item # MPN Series | Body Construction Fiberglass-reinforced thermoplastic | Horsepower | MAXIMUM CAPACITY 18 GPM (model MPNE) | FLOW at 10-foot LIFT and 20 PSI 10.2 GPM average (model MPND) | MAX LIFT 25' | MAX SHUT-OFF PRESSURE 78 PSI (model MPND) | MAXIMUM INLET PRESSURE 22 PSI | PRESSURE SWITCH SETTINGS 30 - 50 PSI | SUCTION SIZE 1-1/4" NPT (female) | DRIVE SIZE n/a | DISCHARGE SIZE 1" NPT (female) | AMP DRAW full load 14.8 max (model MPNE on 115v) | Voltage 230v/115v Dual Voltage Motors | RECOMMENDED BREAKER Depends upon Voltage and Horsepower | MAXIMUM WATER TEMPERATURE 140 °F (60 °C) | Impeller Engineered polymer | BASE 10-gauge steel | NOZZLE Polypropylene | VENTURI Polypropylene | DIFFUSER Polypropylene |
Item # MPNC | Body Construction | Horsepower 1/2 | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 20 PSI | MAX LIFT | MAX SHUT-OFF PRESSURE | MAXIMUM INLET PRESSURE | PRESSURE SWITCH SETTINGS | SUCTION SIZE | DRIVE SIZE | DISCHARGE SIZE | AMP DRAW full load | Voltage | RECOMMENDED BREAKER | MAXIMUM WATER TEMPERATURE | Impeller | BASE | NOZZLE | VENTURI | DIFFUSER |
Item # MPND | Body Construction | Horsepower 3/4 | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 20 PSI | MAX LIFT | MAX SHUT-OFF PRESSURE | MAXIMUM INLET PRESSURE | PRESSURE SWITCH SETTINGS | SUCTION SIZE | DRIVE SIZE | DISCHARGE SIZE | AMP DRAW full load | Voltage | RECOMMENDED BREAKER | MAXIMUM WATER TEMPERATURE | Impeller | BASE | NOZZLE | VENTURI | DIFFUSER |
Item # MPNE | Body Construction | Horsepower 1 | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 20 PSI | MAX LIFT | MAX SHUT-OFF PRESSURE | MAXIMUM INLET PRESSURE | PRESSURE SWITCH SETTINGS | SUCTION SIZE | DRIVE SIZE | DISCHARGE SIZE | AMP DRAW full load | Voltage | RECOMMENDED BREAKER | MAXIMUM WATER TEMPERATURE | Impeller | BASE | NOZZLE | VENTURI | DIFFUSER |