Green Power And Company

Solids Handling – 2” spherical capabilities.
Overload Protection – Built-in thermal overload with automatic reset.
Bearing and Mechanical Seal – Permanently lubricated for long life.
Stainless Steel Hardware – Allows for easy disassembly after extended service.
Serviceability – Heavy-duty lift-out ring.
Controls – Standard controls available for automatic operation.
Cord Design – In-field replaceable 50’ cord available, 115 volt only.

Applications: Sewage, Effluent and Wastewater Removal and Transfer, Sump Drainage, Dewatering, Flood Control

CAPACITIES: 130 GPM 492 LPM

SHUT-OFF HEAD: 18’ 5.5 m

OPERATION TETHERED: On: 16” 406.4 mm | Off: 7” 177.8 mm

DISCHARGE, NPT: 2”

POWER CORD: 10’ or 20’ water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug

IMPELLER: Vortex reinforced Noryl® with brass threaded insert

VOLUTE CASE: Cast Iron

MOTOR HOUSING: Cast Iron

SHAFT SEALS: Type 6A Carbon and Ceramic

ACCEPTABLE PH RANGE: 5-9

MOTOR: 1/2 HP, 1550 RPM, 115 Volt or 230 Volt, single-phase, 60Hz. Oil-filled. Built-in thermal overload protection with automatic reset.

INTERMITTENT LIQUID TEMP.: 130°F 54.4°C

SOLIDS HANDLING: 2” 50.8 mm

Item #	HP	Amps (Max)	Voltage	Phase Cycles	Cord Length	Switch Setting On	Switch Setting Off	Mechanical Switch Type
Item # MWS550110M	HP 1/2	Amps (Max) 13.0	Voltage 115	Phase Cycles 1/60	Cord Length 10'	Switch Setting On -	Switch Setting Off -	Mechanical Switch Type Manual
Item # MWS550110T	HP 1/2	Amps (Max) 13.0	Voltage 115	Phase Cycles 1/60	Cord Length 10'	Switch Setting On 16"	Switch Setting Off 7"	Mechanical Switch Type Tethered
Item # MWS550120M	HP 1/2	Amps (Max) 13.0	Voltage 115	Phase Cycles 1/60	Cord Length 20'	Switch Setting On -	Switch Setting Off -	Mechanical Switch Type Manual
Item # MWS550120T	HP 1/2	Amps (Max) 13.0	Voltage 115	Phase Cycles 1/60	Cord Length 20'	Switch Setting On 16"	Switch Setting Off 7"	Mechanical Switch Type Tethered

Downloads