Myers expands its successful line of sump, effluent and sewage pumps for plumbing contractors.
- Impeller – Non-clog vortex style, pump out vanes for seal protection.
- Dual Shaft Seals – Primary mechanical seal with a secondary self-lubricating lip seal.
- Bearing and Mechanical Seal – Permanently lubricated for long life.
- Serviceability – Heavy-duty lift-out ring, field serviceable.
- Overload Protection – Built-in thermal overload with automatic reset on single phase.
- Cord Design – Prevents oil loss from and moisture protection for motor.
- Controls – Standard controls available for automatic operation.
RESOURCES
SPECIFICATIONS
APPLICATIONS:
Sewage and Wastewater Removal
CAPACITIES:
135 GPM 510 LPM
Shut-off Head:
29’ 8.8 m
SOLIDS HANDLING:
2” 50.8 mm
Intermittent Liquid Temp.:
130°F 55°C
MOTOR:
1/2 and 3/4 HP, 1725 RPM, 115 or 230 Volt, single-phase, 60Hz. Oil-filled. Permanent split capacitor. Built-in thermal overload protection with automatic reset.
ACCEPTABLE PH RANGE:
6-9
SHAFT SEALS:
Type 6A or equal, Buna-N elastomers, silicon carbide seal faces, stainless steel metal parts.
MOTOR HOUSING:
Cast Iron
VOLUTE CASE:
Cast Iron
IMPELLER:
Cast Iron Vortex
POWER CORD:
Single phase: 20’ oil and water resistant 3 wire 16-3 SJTW-A/SJTW with UL listed integrally grounded three-prong plug
DISCHARGE, NPT:
3" (76.2 mm)
OPERATION TETHERED:
On: 20” 508 mm | Off: 11” 279.4 mm
| Item # | Motor HP | Voltage | Phase | Amps (Max) | Individual Branch Circuit Required (Amps) | Discharge Adapter Size (Inches) | Switch Setting On | Switch Setting Off |
|---|---|---|---|---|---|---|---|---|
Item # MWS9100220M | Motor HP 1 | Voltage 230 | Phase 1 | Amps (Max) 8.5 | Individual Branch Circuit Required (Amps) 15 | Discharge Adapter Size (Inches) 2,3 | Switch Setting On | Switch Setting Off |
Item # MWS9150220M | Motor HP 1 1/2 | Voltage 230 | Phase 1 | Amps (Max) 4.7 | Individual Branch Circuit Required (Amps) 10 | Discharge Adapter Size (Inches) 2,3 | Switch Setting On | Switch Setting Off |
Item # MWS9150420M | Motor HP 1 1/2 | Voltage 460 | Phase 3 | Amps (Max) 4.7 | Individual Branch Circuit Required (Amps) 10 | Discharge Adapter Size (Inches) 2,3 | Switch Setting On | Switch Setting Off |
Item # MWS9200220M | Motor HP 2 | Voltage 230 | Phase 1 | Amps (Max) 13.0 | Individual Branch Circuit Required (Amps) 15 | Discharge Adapter Size (Inches) 2,3 | Switch Setting On | Switch Setting Off |
Item # MWS9200420M | Motor HP 2 | Voltage 460 | Phase 3 | Amps (Max) 5.3 | Individual Branch Circuit Required (Amps) 10 | Discharge Adapter Size (Inches) 2,3 | Switch Setting On | Switch Setting Off |