Quick priming PQP Series Pump feature lightweight construction in a self-priming design. These models offer a stronger pump body with reinforcement ribs and also a new 2" suction that is designed for the professional pump contractor.
- Fiberglass-reinforced polypropylene pump body and seal plate is lightweight, corrosion-resistant and exceptionally strong
- Drain port provided for easy winterizing
- Corrosion-resistant composite pump base
- Easy serviceable back pullout design
- 2-compartment, square flange motor with thermal overload protection
- Rapid priming once pump body is filled with water
RESOURCES
SPECIFICATION
| Item # | Body Construction | Horsepower | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 30 PSI | MAX LIFT | MAXIMUM DISCHARGE PRESSURE | MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | SUCTION SIZE | DISCHARGE SIZE | AMP DRAW full load | MAXIMUM WATER TEMPERATURE | BASE | Seal Plate | Impeller | DIFFUSER | Shaft | CLAMP |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Item # PQP Series | Body Construction | Horsepower | MAXIMUM CAPACITY 90 GPM (model PQP25) | FLOW at 10-foot LIFT and 30 PSI 44 GPM (model PQP15) | MAX LIFT 25' | MAXIMUM DISCHARGE PRESSURE 60 PSI (model PQP25) | MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | SUCTION SIZE | DISCHARGE SIZE | AMP DRAW full load Model & Voltage Dependent | MAXIMUM WATER TEMPERATURE 140 F (60 C) | BASE High-impact composite, ABS | Seal Plate Fiberglass-reinforced, Polypropylene | Impeller Polycarbonate | DIFFUSER Polycarbonate | Shaft Stainless Steel | CLAMP Stainless Steel |
Item # PQP10 | Body Construction Fiberglass-reinforced thermoplastic | Horsepower 1 | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 30 PSI | MAX LIFT | MAXIMUM DISCHARGE PRESSURE | MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure 105 PSI | SUCTION SIZE 1-1/2" NPT | DISCHARGE SIZE 1-1/2" NPT | AMP DRAW full load | MAXIMUM WATER TEMPERATURE | BASE | Seal Plate | Impeller | DIFFUSER | Shaft | CLAMP |
Item # PQP15 | Body Construction Fiberglass-reinforced thermoplastic | Horsepower 1-1/2 | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 30 PSI | MAX LIFT | MAXIMUM DISCHARGE PRESSURE | MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure 110 PSI | SUCTION SIZE 1-1/2" NPT | DISCHARGE SIZE 1-1/2" NPT | AMP DRAW full load | MAXIMUM WATER TEMPERATURE | BASE | Seal Plate | Impeller | DIFFUSER | Shaft | CLAMP |
Item # PQP20 | Body Construction Fiberglass-reinforced thermoplastic | Horsepower 2 | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 30 PSI | MAX LIFT | MAXIMUM DISCHARGE PRESSURE | MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure 120 PSI | SUCTION SIZE 2" NPT | DISCHARGE SIZE 2" NPT | AMP DRAW full load | MAXIMUM WATER TEMPERATURE | BASE | Seal Plate | Impeller | DIFFUSER | Shaft | CLAMP |
Item # PQP25 | Body Construction Fiberglass-reinforced thermoplastic | Horsepower 2-1/2 | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 30 PSI | MAX LIFT | MAXIMUM DISCHARGE PRESSURE | MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure 140 PSI | SUCTION SIZE 2" NPT | DISCHARGE SIZE 2" NPT | AMP DRAW full load | MAXIMUM WATER TEMPERATURE | BASE | Seal Plate | Impeller | DIFFUSER | Shaft | CLAMP |