The Myers V2 series grinder is engineered from the ground up, in order to overcome the increased debris and higher pressure required in today’s wastewater environment. It features a patented axial cutter design and semi-open impeller to effectively macerate challenging sewage solids into a fine slurry.
Cable entry system: Provides double seal protection. Cable jacket sealed by compression fitting. Individual wires sealed by compression grommet. Power cord can be replaced without disturbing motor. Optional quick disconnect available
Grinder assembly: Rotating cutter and stationary cutter are replaceable without dismantling pump. Constructed of 440 SST hardened to 57-60 Rockwell
Ball Bearings: Upper ball bearing and lower double row angular contact bearing support shaft and rotor.
Seal leak probe: Detects water in seal housing, activates warning light in control panel.
Volute case: Cast iron 1-1⁄4" NPT vertical flanged discharge.
Stator: 2 hp, 3450 rpm, single and three phase. Oil-filled motor conducts heat and lubricates bearings.
Heavy 416 SST shaft: Corrosion resistant. Reduces shaft deflection due to grinding loads.
Shaft seals: Double tandem mechanical shaft seals protect motor. Oil-filled seal chamber provides continuous lubrication.
Impeller: SST, semi-open impeller handles ground slurry without clogging or binding. Pump-out vanes help keep trash from seal, reduces pressure at seal faces.
Item # | VOLTAGE PHASE | Horsepower | Start Amps | Full Load Amps | CORD |
---|---|---|---|---|---|
Item # VH20-21-20 | VOLTAGE PHASE 230/1 | Horsepower 2 | Start Amps 49 | Full Load Amps 18.5 | CORD 20' |
Item # VH20-21-35 | VOLTAGE PHASE 230/1 | Horsepower 2 | Start Amps 49 | Full Load Amps 18.5 | CORD 35' |
Item # VH20-03-20 | VOLTAGE PHASE 200/3 | Horsepower 2 | Start Amps 53 | Full Load Amps 12.5 | CORD 20' |
Item # VH20-03-35 | VOLTAGE PHASE 200/3 | Horsepower 2 | Start Amps 53 | Full Load Amps 12.5 | CORD 35' |
Item # VH20-23-20 | VOLTAGE PHASE 230/3 | Horsepower 2 | Start Amps 46 | Full Load Amps 12 | CORD 20' |
Item # VH20-23-35 | VOLTAGE PHASE 230/3 | Horsepower 2 | Start Amps 46 | Full Load Amps 12 | CORD 35' |
Item # VH20-43-20 | VOLTAGE PHASE 460/3 | Horsepower 2 | Start Amps 23 | Full Load Amps 6 | CORD 20' |
Item # VH20-43-35 | VOLTAGE PHASE 460/3 | Horsepower 2 | Start Amps 23 | Full Load Amps 6 | CORD 35' |
Item # VH20-53-20 | VOLTAGE PHASE 575/3 | Horsepower 2 | Start Amps 25 | Full Load Amps 5 | CORD 20' |
Item # VH20-53-35 | VOLTAGE PHASE 575/3 | Horsepower 2 | Start Amps 25 | Full Load Amps 5 | CORD 35' |
Item # | VOLTAGE PHASE | Horsepower | Start Amps | Full Load Amps | CORD |
---|---|---|---|---|---|
Item # VS20-01-20 | VOLTAGE PHASE 200/1 | Horsepower 2 | Start Amps 66 | Full Load Amps 16 | CORD 20' |
Item # VS20-01-35 | VOLTAGE PHASE 200/1 | Horsepower 2 | Start Amps 66 | Full Load Amps 16 | CORD 35' |
Item # VS20-21-20 | VOLTAGE PHASE 230/1 | Horsepower 2 | Start Amps 49 | Full Load Amps 13.5 | CORD 20' |
Item # VS20-21-35 | VOLTAGE PHASE 230/1 | Horsepower 2 | Start Amps 49 | Full Load Amps 13.5 | CORD 35' |
Item # VS20-03-20 | VOLTAGE PHASE 200/3 | Horsepower 2 | Start Amps 53 | Full Load Amps 10 | CORD 20' |
Item # VS20-03-35 | VOLTAGE PHASE 200/3 | Horsepower 2 | Start Amps 53 | Full Load Amps 10 | CORD 35' |
Item # VS20-23-20 | VOLTAGE PHASE 230/3 | Horsepower 2 | Start Amps 46 | Full Load Amps 9 | CORD 20' |
Item # VS20-23-35 | VOLTAGE PHASE 230/3 | Horsepower 2 | Start Amps 46 | Full Load Amps 9 | CORD 35' |
Item # VS20-43-20 | VOLTAGE PHASE 460/3 | Horsepower 2 | Start Amps 23 | Full Load Amps 4.2 | CORD 20' |
Item # VS20-43-35 | VOLTAGE PHASE 460/3 | Horsepower 2 | Start Amps 23 | Full Load Amps 4.2 | CORD 35' |
Item # VS20-53-20 | VOLTAGE PHASE 575/3 | Horsepower 2 | Start Amps 25 | Full Load Amps 5 | CORD 20' |
Item # VS20-53-35 | VOLTAGE PHASE 575/3 | Horsepower 2 | Start Amps 25 | Full Load Amps 5 | CORD 35' |