Precision-engineered, high-quality, rugged Signature 2000® Stainless Steel Series Pumps deliver efficient, dependable performance even in rough, aggressive water. Heads to 1,950 feet and capacities to 65 GPM. Built to deliver long-term, trouble-free service. Floating impeller design resists sand and reduces sand locking. These pumps feature the proven SignaSeal™ staging system.
The Signature 2000® 4" submersible pump design has been delivering dependable performance since 1990. Our floating stage design continues to handle even the most aggressive water with our SignaSeal™ system that breaks down debris and reduces locking. Now we’re going further by upstaging and adding additional features to the 4" inch submersible pumps you’ve grown to trust and rely on every day!
Better Performance
With increased staging across much of our 1/2 to 1-1/2HP pumps, you'll enjoy even greater performance receiving more depth and/or more flow than before.
Beat the Competition
Our increased staging gives you an average of 20% higher performance than competitive pumps at like horsepower and rated flow. We've even developed a tool to show you how our 4" submersible pumps compare to the top competitors. Visit www.pumps.com/curveenvy.html to compare your pump!
Item # | Horsepower | Stages | VOLTAGES | Shell | Diameter | Discharge | DISCHARGE BEARING | IMPELLERS | DIFFUSERS |
---|---|---|---|---|---|---|---|---|---|
Item # HS Series | Horsepower 1/2 through 10 | Stages 5 through 54 | VOLTAGES 115/230/460 | Shell Stainless Steel | Diameter 3-7/8" | Discharge Stainless Steel | DISCHARGE BEARING Nylatron® | IMPELLERS Acetal | DIFFUSERS Polycarbonate |
HORSEPOWER: Available in 1/2 thru 1-1/2 HP
PERFORMANCE SERIES: 10, 15, 20, 30, and 50 GPM Series Available
NUMBER OF STAGES: 4 - 38 (model dependent)
VOLTAGE: 115v, 230v 1- or 3-phase, and 460v 3-phase
NUMBER OF WIRES: 2-wire and 3-wire available
SHELL: Stainless steel
DIAMETER: 3-7/8"
LENGTH: 22-1/4" to 33-1/2"
WEIGHT: 27 to 43 lbs
DISCHARGE: thru 20 GPM: 1-1/4" NPT / 30 & 50 GPM: 2" Stainless steel
DISCHARGE BEARING: Nylatron®*
IMPELLERS: Acetal
DIFFUSERS: Polycarbonate
SUCTION CAPS: Polycarbonate w/ stainless steel insert
THRUST PADS: Proprietary spec
SHAFT END COUPLING: Stainless steel
INTAKE: Stainless steel
INTAKE SCREEN: Stainless steel
CABLE GUARD: Stainless steel
CHECK VALVE: Acetal
*Nylatron® is a registered trademark of Quadrant Engineering Plastic Products